VanAir FD-400 Blast Pak Deliquescent Air Dryer
- 400 cfm @ 100 psi (Will Dry Larger Flow With Greater Pressure)
- Will Achieve Dew Point -10 Degrees Below Ambient
- Built in Aftercooler Removes Moisture Prior to Dryer
- Steel Skid Forklift Channels and Lifting Lugs for Portability
- Downstream Particulate Filter with Permanent Stainless Steel Mesh
- Two Dryer Sight Windows for Desiccant Level Viewing
- Full Load of Dry-O-Lite desiccant is included
- Typical Applications: Sandblasting, Media blasting, Fiber Optics Jetting, Cable Blowing, Well Site Operations
VanAir FD-800 Blast Pak Deliquescent Air Dryer
- 800 cfm @ 100 psi (Will Dry Larger Flow With Greater Pressure)
- Will Achieve Dew Point -10 Degrees Below Ambient
- Built in Aftercooler Removes Moisture Prior to Dryer
- Steel Skid Forklift Channels and Lifting Lugs for Portability
- Downstream Particulate Filter with Permanent Stainless Steel Mesh
- Two Dryer Sight Windows for Desiccant Level Viewing
- Full Load of Dry-O-Lite desiccant is included
- Typical Applications: Sandblasting, Media blasting, Fiber Optics Jetting, Cable Blowing, Well Site Operations, Pipeline Pigging
CAE / VanAir 400 CFM Single Tower Deliquescent Air Dryer
- 400 cfm @ 100 psi (Will Dry Larger Flow With Greater Pressure)
- Will Achieve Dew Point -10 Degrees Below Ambient
- Built in Aftercooler Removes Moisture Prior to Dryer
- Steel Skid Forklift Channels and Lifting Lugs for Portability
- Upstream Coalescing and Downstream Particulate Domnick Hunter Filter with Permanent Stainless Steel Mesh
- Two Dryer Sight Windows for Desiccant Level Viewing
- Full Load of Dry-O-Lite desiccant is included
- Typical Applications: Sandblasting, Media blasting, Fiber Optics Jetting, Cable Blowing, Well Site Operations
CAE / Super-Dry Tongue Mounted Air Dryer Package
- Unique Design to CAE
- 200 cfm @ 100 psig (Will Flow Greater Rates at Higher Pressure)
- 3 stages in one unit: Separation, Filtration and Drying
- Pressure dew point: – 40°F
- Benefits from Air Aftercooler
- Built in Water Separator
- Easy replaceable self-contained Desiccant Cartridges
- Very Compact In Design
- Ideal for Portable Applications
- High Efficiency Polypropylene Coalescent Filtration Elements at Inlet and Outlet
- No Loss of Air
- Typical Applications: Sandblasting, Media blasting, Fiber Optics Jetting, Cable Blowing, Well Site Operations, Paint Spraying, Spray Foam, Railway Applications
Ingersoll Rand EH250 – 250 CFM Externally Heated Desiccant Air Dryer
- Pressure Dew Point: -40°F to -100°F (-40°C to -70°C)
- Low profile design for ease of service
- Low pressure drop design
- Pre-filter and after-filter as standard
- Easy to use, advanced microprocessor
- High performance valves for long extended life
- Ideally suited to indoor applications, manufacturing and processing plants etc.
Xebec 1000 – 1600CFM Desiccant Air Dryer
- 1000 cfm @ 100 psi / 1600 cfm @ 150 psi
- Digital Hygrometer
- Chamber Pressure Gauges
- Purge Line Pressure Gauge
- High Humidity Alarm
- Pre and After Filters
- Pressure Dew Point: -40°F
- Typical Applications: Sandblasting, Manufacturing and Processing Plants, Pipeline Pigging